Im lookin to do a vh swap into my s14, and was wondering if anyone could help me with the
wiring. Is it like an rb or sr swap or do I have to run a stand alone? If it is like a typical sr/rb swap
does anyone know which wires I need to match up? And yes I have searched, just no luck
Results 1 to 2 of 2
Thread: s14 vh45 swap wiring question
02-14-2012, 12:50 PM #1
- Join Date
- Jun 2005
- The COUVE WA
s14 vh45 swap wiring question
04-10-2012, 06:32 PM #2
- Join Date
- Nov 2008
- Bellevue, WA
It is similar to an RB or SR and you use the stock VH ECU. To figure out the wires you need to hook up you will need a Factory Service Manual for an S14 and one for the VH45 if you want to do the wiring yourself.
MazWorx makes a conversion harness if you want to pony up the $240.
If you check out V8nissans.com they have a wiring breakdown but its for an S13 and you will need to join there forum to download it. It is a place to start.
By ICanHas240 in forum Parts and AccessoriesReplies: 2Last Post: 07-04-2011, 12:35 PM
By JPetersen_s13 in forum Technical ChatReplies: 5Last Post: 04-08-2009, 02:18 PM
By JPetersen_s13 in forum Technical ChatReplies: 0Last Post: 04-06-2009, 05:05 PM
By ShiftD in forum Technical ChatReplies: 2Last Post: 06-29-2007, 01:05 AM
By ShiftD in forum Technical ChatReplies: 0Last Post: 06-28-2007, 09:50 PM